Find ASME B16.5 Stainless Steel SS304 Flange, Stainless Steel Flange SS316 SS304 SS310, ASME ANSI Slip-on Flange on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Stainless Steel Flange > SS304 Steel Flange > ASME B16.5 Stainless Steel SS304 Flange

ASME B16.5 Stainless Steel SS304 Flange

Basic Info

Model No.: 1/2'' to 48''

Product Description

ASME B16.5 Stainless Steel SS304 Flange

The ASME B16.5 code requires that the flange face (raised face and flat face) has a specific roughness to ensure that this surface be compatible with the gasket and provide a high quality seal.

Image of of serrated texture on Raised Face.

A serrated finish, either concentric or spiral, is required with 30 to 55 grooves per inch and a resultant roughness between 125 and 500 micro inches. This allows for various grades of surface finish to be made available by flange manufactures for the gasket contact surface of metal flanges.

The most used Surfaces

Stock Finish

The most widely used of any flange surface finish, because practically, is suitable for all ordinary service conditions. Under compression, the soft face from a gasket will embed into this finish, which helps create a seal, and a high level of friction is generated between the mating surfaces. The finish for these flanges is generated by a 1.6 mm radius round-nosed tool at a feed rate of 0.8 mm per revolution up to 12 inch. For sizes 14 inch and larger, the finish is made with 3.2 mm round-nosed tool at a feed of 1.2 mm per revolution.

Spiral Serrated

This is also a continuous or phonographic spiral groove, but it differs from the stock finish in that the groove typically is generated using a 90-deg tool which creates a "V" geometry with 45° angled serration.

Concentric Serrated

As the name suggests, this finish is comprised of concentric grooves. A 90° tool is used and the serrations are spaced evenly across the face.

Smooth Finish

This finish shows no visually apparent tool markings. These finishes are typically utilized for gaskets with metal facings such as double jacketed, flat steel and corrugated metal. The smooth surfaces mate to create a seal and depend on the flatness of the opposing faces to effect a seal. This is typically achieved by having the gasket contact surface formed by a continuous (sometimes called phonographic) spiral groove generated by a 0.8 mm radius round-nosed tool at a feed rate of 0.3 mm per revolution with a depth of 0.05 mm. This will result in a roughness between Ra 3.2 and 6.3 micrometers (125 - 250 micro inch).

Remark(s) of the Author...


Contact us if you need more details on ASME B16.5 Stainless Steel SS304 Flange. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Stainless Steel Flange SS316 SS304 SS310、ASME ANSI Slip-on Flange. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Stainless Steel Flange > SS304 Steel Flange