PTFE Tube with Best Chemical Corrosion Resistance

Model NO.: HY-P330H


Kind: PTFE Tube


Contraction Percentage: ＜0.4%


Apparent Density: 2.10~2.30


Crack Elongation(Min): ≥230%


Specification: SGS


HS Code: 39209910




Material: PTFE


Water Absorption: 1.5%~3.5%


Tensile Strength: (81~130)MPa


Tensile Strength(Min): 18 MPa


Trademark: hysealing


Origin: Cixi China




Description:

HYP330H PTFE tube are moulded, pressed or extruded from 100% virgin PTFE. It has the best chemical corrosion resistance among known plastics. Without being aging, lowest friction coefficient, wear resistance. The unloaded operating temperature range is -180~+260C.

Specifications:

Type	Specifications
	OD(mm)	Wall Thick.(mm)	Length(mm)
Pressed Pipe	1~25	0.1~2.5	Up to your requirement
Extruded Pipe	25~200	1.5~8	Up to your requirement
Die Pressed Pipe	25~1800	5~500	100~1000

III,Main properties:

Properties	Unit	Result
Apparent Density	g/cm 3	2.10~2.30
Tensile Strength(min)	≥Mpa	18
Crack Elongation(min)	≥%	230

Item	Filler	Filler Content by Weight %	Properties	Applications
1	Glass filled PTFE	5 - 40	High compressive strength	Ball valve component, bridge
			Excellent chemical resistance	bearing pads, ship launching
			Improved wear resistance under load & permanent deformation	pads, pipe supporting pads.
2	Carbon/Coke filled PTFE(soft amorphous/ hard fiber)	10 - 35	High compressive strength	Rider and piston rings of air compressor
			Improved wear resistance under load & permanent deformation
			Better thermal / electrical conductivity.
3	Graphite filled PTFE(pure crystalline carbon)	515	High compressive strength	Used as shaft bearings and in chemical high speed Chemical pumps.
			Improved wear resistance under load & permanent deformation
			Better thermal / electrical conductivity.
			Good chemical resistance
			Improved frictional properties.
4	Bronze filled PTFE(oxidising / Non oxidising)	40 - 60	High compressive strength	Wear strips Machine tool liners, hydraulic seals.
			Excellent wear resistance improved under load & permanent deformation
			Better thermal / electrical conductivity.
			Good chemical resistance
			Very low cold flow.
5	Bronze plus, Molybdenum Disulphide filled PTFE	55 + 5	Improved fictional properties	Hydraulic seals.
			High compressive strength
			Excellent wear resistance improved under load & permanent deformation
			Good thermal / electrical conductivity.
			Very low cold flow.
6	Aluminium Oxide filled PTFE	510	Excellent electrical properties	Electrical insulators in circuit breaker
			Excellent compressive strength
			Excellent wear resistance improved under load & permanent deformation
7	Calcium Fluoride filled PTFE	510	Excellent chemical resistance	Mechanical seal parts.
			Improved wear resistance under load & permanent deformation
			Excellent compressive strength
			Good with chemicals that attack glass
8	Stainless Steel filled PTFE	510	Excellent chemical resistance	High Pressure chemical handling equipments.
			Outstanding mechanical properties
			Good wear resistance
9	Mica filled PTFE	510	Excellent compressive strength	Electrical and thermal insulation pads under compressive loads.
			Very low coefficient of thermal expansion
			Poor tensile properties
10	Glass + MoS2 filled PTFE	15 + 5	High compressive strength	Low torque valve components
			Excellent chemical resistance
			Improved wear resistance under load & permanent deformation
			Improved frictional properties
11	Pigmented PTFE		Improved Visibility	Colour coded electrical cable sheathings

Contact us if you need more details on PTFE Tube. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Teflon Tape、Tube. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PTFE Products